1.Introduction of wall machine production line
(Compound) heat preserving lightweight wall panel adopts the newly high technology from South Korea, which is produced with the policy of lower investment but higher profit.
2.It includes five systems: Batching System, Mixing System, Slurry-infusing System, Molding System, and Automatic Demoulding System.
3.Process of producing: Material batching → mixing → slurry infusing → molding →automatic demoulding and stacking→ finished product
4. Raw material: cement, eps foam, fly-ash, sand, ceramiste, cement board, calcium silicate board, and some chemical additives
Technical Parameter of Mixer
Type |
JQ1000 With lift port |
JQ1000 |
Charging Volume(L) |
1600 |
1600 |
Discharging Volume(L) |
1000 |
1000 |
Max. Grain Size of Aggregate(mm) |
5 |
5 |
Speed of Mixing Blade(r/min) |
26.4 |
21.9 |
Mixing Blade(PCS) |
6 |
6 |
Model of Mixing Motor |
XWD8-59-15kw |
Power of Mixing Motor(KW) |
15 |
15 |
Model of Winch |
500.3 |
---- |
Power of Winch(KW) |
4.5kw/i=20.27 |
---- |
Height of Unloading Material(mm) |
1850 |
1850 |
Model of Water Pump Motor |
3 phase self-sucking pump |
Power of Water Pump Mo |
1.1KW |
1.1KW |
Frame Dimension in Working |
3900×4728×4382 |
3900×1550×5750 |
Frame Dimension |
7560x6060x6565 |
7560x3065x6565 |
Net Weight(T) |
6.2 |
5.5 |
Technical Parameter of Slurry Container
Function |
Transferring the material and inject material into wall panel molding machine under high pressure |
Infusing Volume |
1m³ |
Working Pressure |
0.4Mpa |
Motor Power |
Traveling motor: 1.1KW
Aircompressor motor: 3KW |
Frame Dimension |
2755x1200x1665mm |
Component |
Slurry container, rail, air compressor, pipe |
Technical Parameter of Wall Panel Molding Machine
Function |
Molding system |
Finished Wall Panel Dimension |
3000x600x75/90/100/150/200mm |
Output of Wall Panel with Different Thickness |
75mm |
14 PCS |
90mm |
12 PCS |
100mm |
11 PCS |
150mm |
8 PCS |
200mm |
7 PCS |
Hydraulic Unit |
Motor power |
2.2 KW |
Operating Pressure |
3-4Mpa |
Molding Time |
Two Hours (High aluminium cement) |
Net Weight |
5 T |
Component |
Host machine, hydraulic station, mould |
Technical Parameter of Automatice Mobile Stacker
Function |
(Pulling panel out off wall panel molding machine,collecting wall panel together ,turning over wall panel with 90°,and taking wall panels to the outside with forklift ) |
|
|
Motor Power |
Hydraulic Unit Motor |
6.6kw |
|
Traveling Motor |
1.5kw |
|
Demoulding Motor |
1.1kw |
|
Cylinder Travel |
Wall panel pushing cylinder |
1200mm |
|
Turnover Cylinder |
650mm |
|
Weight |
2.2T |
|
Component |
Hydraulic unit motor, Turnover Machine, Demoulding Device, Wall
panel pushing device , rail ,traveling motor,Electrical control cabine |
|
Frame |
4350×3612×1150mm |
|